Description: This extremely robust, fully automatic rotary laser with green laser technology is ideal for precise alignment work in the horizontal and vertical planes. The AntiShake function allows a fast set-up on vibrating surfaces and in windy conditions, a decisive advantage for reliable results under demanding site conditions. For gradient work, the horizontal plane can be digitally tilted in the X and Y directions. Gradients of up to 6° are implemented automatically via the motorised Tilt function; steeper gradients can be set manually or with an optional angle plate. The ADS-Tilt function ensures a high level of measurement reliability by automatically switching the laser off if its position is changed unintentionally, preventing incorrect continuation of work. After switching on and complete levelling, the Tilt function is automatically active after only approx. 20 seconds. Thanks to its robust design and weather-resistant top cover, the device is optimally protected. The high-performance lithium-ion rechargeable battery ensures a long operating time.

Very robust construction with a weather-resistant top cover for optimum device protection

Good visibility through green laser technology

Digital inclination adjustment: The horizontal plane can be inclined in the X- and Y-axis

Gradients up to 6° can be aligned easily using the motorised Tilt function; gradients over 6° can be set using the manual Tilt function and an optional angle plate

Reliable measurement through automatic power off with ADS tilt

Ready for immediate use: After switching on and complete levelling, Tilt is automatically active after approx. 20 seconds

AntiShake provides quick setup on vibrating surfaces and when exposed to wind

The 90° reference beam is provided to plumb and align partition walls

Time-saving fully automatic alignment by means of automatic sensor

Remote operation controls all functions from all sides up to max. 40 m

Extremely simple operation for practical use

Powerful lithium-ion battery with long operating time

Transport LOCK: The device is protected by a special motor brake during transport

Long range of the laser receiver: up to 350 m

LC display front and rear

Switchable, extremely loud Piezo buzzer sound

Rugged enclosure

Head- and side magnets

Height difference to laser level is displayed graphically and numerically

Horizontal/vertical levelling	✅
Hand receiver mode	✅
Scan mode	✅
Spot mode	✅
Motorised slope function	✅
Manual slope function	✅
Precision sensor levelling	✅
Battery and mains operation	✅
Anti-Drift-System (ADS)	✅
Plumb laser up (90° reference beam)	✅
Plumb laser down	✅
Tilt warning function	✅
AntiShake	✅
Self-Levelling Range	± 6°
Accuracy	±0.075 mm/m
Levelling	automatic horizontal / vertical levelling with electronic levels and motors
Laser Wavelength	515 nm
Laser Class	2 / < 1 mW
Laser Modes	Spot mode Scan mode Rotary mode Hand receiver mode
Laser Reception Range	max. 350 m
Protection Class	IP 66
Power Supply	Power adapter 5V / DC / 2A Li-ion battery pack 3.7V / 8Ah / 29.6Wh
Operating Time	approx. 35 hours
Battery Recharging Time	approx. 4 hours
Operating Conditions	-10°C … 50°C, Luftfeuchtigkeit max. 80% rH, nicht kondensierend, Arbeitshöhe max. 4000 m über NN (Normalnull)
Storage Conditions	-10°C … 70°C, Luftfeuchtigkeit max. 80% rH
Dimensions (W x H x D)	215 mm x 205 mm x 165 mm
Weight	2600 g (inkl. Akkupack)

Scope of delivery: 

Quadrum GSL M350

SensoMaster M350 Set

universal mount

remote control

Li-ion battery pack

power supply / battery charger

batteries

carrying case

Accessories (optional):

• 
  SensoLite 410 Set
  (Art.No.: 028.75) - Laser receiver for rotary lasers


• 
  VarioStand L 300 cm
  (Art.No.: 080.24A) - tripod


• 
  Crank Tripod P 175 cm
  (Art.No.: 080.26) - crank tripod


• 
  Crank Tripod 260 cm
  (Art.No.: 080.35) - Crank tripod


• 
  Crank Tripod 300 cm
  (Art.No.: 080.39) - Crank tripod


• 
  Telescopic Levelling Staff LT 4 m
  (Art.No.: 080.42) - Levelling staff


• 
  Telescopic Levelling Staff LT 5 m
  (Art.No.: 080.43) - Levelling staff


• 
  Angle Bracket 5/8”
  (Art.No.: 080.75) - Angle plate for rotary lasers


• 
  Wall Mount Pro
  (Art.No.: 080.71) - Wall bracket


• 
  Flexi Levelling Staff red
  (Art.No.: 080.50) - Levelling staff

Documentation:

Instructions
Instructions part 2

Categorie: